LaserGold and LaserBlack Infrared CoatingsSpecification PlatingTurn-Key Fabrication and Plating ServicePlastics and Difficult SubstratesElectroforming SpecialistsRelated Links
Application ExamplesQuality StuffEpner StuffPress and Technical DataMission StatementContact UsTrade ShowsArtists and Scupture

Infrared Lightpipes, Light Guides, Waveguides and Homogenizers

Lightpipes / Waveguides with Infrared Laser Gold IR coatings for maximum Infrared Reflectance 
•  Custom built straight and curved … highly polished bores
•  Diameters from <1 mm to 400mm  – Varied lengths to 1 meter long
•  Typical IR reflection >98% from 1.0 to > 12 microns.

Laser Gold TM coatings have been developed over decades to give ultimate infrared reflectivity, which is essentially `flat’ from 1 through 12 micron. Reflectivity levels exceeding 99% have been recorded above 1.5 micron for durable, Cleanable surfaces in 0.01 to 100 micron thickness.

Home
Epner's Laser Gold


Illustrated are conical variations on Infrared Homogenizers. Laser Gold lining these electroformed shapes permit a collimated beam of IR energy to be dispersed and exit the cone as a "glowing plane of light." (click on photos for details)
Infrared Homogenizers Infrared Homogenizers Infrared Homogenizers
Electroformed Cold Shields or Radiation Shields
Electroformed
"cold shields" or radiation shields. IR focal plane array sensor systems, Laser Black interior.		 IR Infrared Light Pipes
IR Lightpipes or waveguides, as they are sometimes called, have been fabricated by Epner Technology to less than 1mm. diameter and 1 meter in length.

Home
Epner's Laser Gold

 

 

 IR Infrared Light Pipes
IR Infrared Light Pipes
(click on photo for details)
IR Lightpipes or waveguides, as they are sometimes called, have been fabricated by Epner Technology to less than 1mm. diameter and 1 meter in length.

Contact Epner Technology